Our detailed assembly animation videos make assembly seamless, typically taking around two hours.

No, steering is manual, as shown in our videos.

Wash to remove sand and salt for durability.

While currently beyond our capabilities, we aim to enhance features through future R&D, supported by investors.

It was the Dutton-Lainson (DL400) Plated Pulling Winch – 400 lb.

No, due to manufacturer changes.

Design limitations required a specific fit.

Yes, though more expensive. Dutton-Lainson® worm gear winch (WG1500)

No, they’re splash-proof. Avoid submersion.

Yes, but rinse afterward.

Yes, with our Torque Drive Units.

Yes, using our quick-release system.

Yes, A fully loaded fishing Kayak weight is about 100kg and Stand-Up Jet-Ski weight range between 150 to 230kg so this is the reason they are different, and here are the main differences:

• Frame: The Kayak Dolly has a slightly shorter frame and it’s made out of 4mm thickness Aluminum material versus the Jet-ski Dolly that uses 6mm thickness Aluminum material.
• Wheels: The Kayak Dolly utilizes the 42cm WheelEEZ wheels and the Jet-Ski Dolly comes with the bigger 49cm WheelEEZ wheels.
• Motors (Torque Drive Units): It’s the same unit for both Jet-Ski and Kayak dolly but one difference only. The main Spur Gear for the Jet-Ski Dolly is larger than the one for the Kayak due to the larger 49cm wheels.

Our one-year warranty covers malfunctions or breakages during normal use. Contact us for replacement parts; while we cover parts and shipping costs during the warranty, you’re responsible for replacing them.

Our motorized dolly is designed to withstand diverse weather conditions, proven by satisfied customers worldwide.

PayPal offers buyer protection, ensuring a full refund if the product doesn’t meet specifications or isn’t delivered.

Air shipping via FedEx or DHL typically takes up to 10 days.

Detailed measurements are available in the Gallery page drawings.

Maintenance requirements are minimal. After use, wash the dolly (including the Torque Drive units) with fresh water to remove the salty water and sand and let it dry.
When stored, Keep it in a shade place in order not to expose the 3D printed parts (they are made from ABS polymer) to direct sunlight.

• If the battery pack (inside the Torque Drive E-Box) is not used for extended periods, it’s advisable to charge it to about 50% before storage. This prevents the battery from falling into a deep discharge state, which can damage it .
• Avoid fully discharging or fully charging the battery frequently. Keeping the charge level between 20% and 80% can help extend its lifespan.
• Use the charger that came with the battery or a compatible one to avoid overcharging and overheating .